JLab has just unveiled their four new wireless speakers ranging from $20 to $150, also ranging in physical size and acoustics.

American consumer audio company, JLab, known for their earbuds, headphones, speakers and other accessories, have just launched their Party Speaker collection – four brand new portable speakers.

While they range in price, size, weight and acoustics, they all share some aspects. They all have Bluetooth 5.3, waterproofing and integrated RGB lights. The lights are customizable in the JLab app where you can select different colors, patterns and sync effects. The app can also be used to update the firmware and adjust the equalizer settings, with a custom 10-band EQ and three presets – JLab Signature, Balanced, and Bass Boost. All four speakers are compatible with LabSync, which lets you connect up to 100 JLab Party speakers, or two for stereo pairing.

Learn more below and purchase them all here.

JLab Epic Party Speaker

Going from largest to smallest, the Epic Party Speaker is the big boy. The Epic stands at 16.4 inches tall, with a diameter of 8.15 inches and weight of 5080g. Is has a cylindrical design with a built-in handle, buttons and a JLab Media Knob on the top. It is IPX6 waterproof.

On the inside, there are four 2.5-inch full-range drivers and two 5.25-inch passive woofers, delivering 100 watts of power and 360 degrees of sound.

The Epic Party Speaker is good for 16 hours of playtime with the RGB lights off at around 50% volume, which is reduced to 14 hours with the lights on. There is a USB-C port for charging the speaker and another USB-C port for charging devices. The 9,000mAh battery should be good for around two smartphones charges. There are also aux in and 1/4-inch jack for microphones.

The Epic Party Speaker is $149.99.

JLab JBuds Party Speaker

The next speaker, slightly more portable than the Epic Part Speaker is the JBuds Party Speaker. With a more squared off design, this one measures 9.76 x 3.35 x 4.13 inches, with a weight of 1330g. The JBuds Party Speaker swaps the handle for an integrated loop. Again the top has buttons, a JLab Media Knob and is IPX6 waterproof. Of the four speakers, the JBuds Party Speaker is the only one available in additional colors – Black, Cyan, and Pink.

Internally there are two 2.5-inch full-frequency drivers and two 2-inch passive woofers, delivering 30 watts of power. There is also a microphone for making calls.

The JBuds Party Speaker will last for 12 hours of playback and 10 hours with the RGB lights turned off. There’s a 3.5mm aux in for wired connections.

The JBuds Party Speaker is $69.99.

JLab Go Party Speaker

Next up is the Go Party Speaker. More portable again, this speaker is cylindrical, 8.27 inches tall, 3.07-inch diameter and weighs 660g. There’s a loop handle, buttons, and JLab Media Knob on the Go too. The Go Party Speaker is IPX6 waterproof.

The Go is packing dual 2-inch full-range drivers and dual 2-inch passive woofers. These produce 10 watts of power. There’s a microphone here as well for calls.

The Go Party Speaker last for an impressive 16 hours with the lights off and 8 hours with the RGB turned on. Much like the speakers above, there’s a 3.5mm aux input for wired devices.

The Go Party Speaker is $29.99.

JLab Pop Party Speaker

The smallest and cheapest of the bunch is the Pop Party Speaker. It measures 1.89 x 7.55 x 3.11 inches and weighs just 246.5g. There is a single multi-function button, which is customizable in the app. The loop handle is detachable and the speaker is IPX5 waterproof.

The Pop speaker has a 2-inch full-range driver, 2-inch passive woofer and produces 5 watts of power.

The battery is good for 8 hours of playtime, which is reduced to 5 hours with the RGB lights enabled.

The Pop Party Speaker is $19.99.